广州SGS 提供 ASTM C610 膨胀珍珠岩模制板状和管状绝热材料 测试服务

SGS offer ASTM C610 molded expanded perlite block and pipe thermal insulation Testing Services

Key words: ASTM C610, block , expanded perlite , fittings; molded; pipe , thermal Insulation , t hermal c onductivity , 膨胀珍珠岩 , 模制板 , 导热系数 , 热阻 , 热阻测试 , 隔热 , 绝热 , 保温 , 绝热材料 , SGS 测试

膨胀珍珠岩模制板、配件、管件绝热材料的主成分通常是膨胀珍珠岩、硅酸盐粘合剂，可能还含有纤维增强材料。

ASTM C610-15 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation ¹

ASTM C610-15 膨胀珍珠岩模制板状和管状绝热材料标准规范 ¹

此规范涵盖使用表面温度在 80 至 1200 华氏度（ 27 ℃ 至 649 ℃ ）的膨胀珍珠岩模制板状、配件、管状绝热材料。

ASTM C610-15 标准规范中物理性能测试要求及测试标准如下：

ASTM C610 Dimensional tolerances 尺寸偏差

ASTM C585 Inner diameter & Outer diameter 内径外径

ASTM C303 Density of Block insulation 板状密度

ASTM C302 Procedure A Pipe insulation 管状密度

ASTM C1045 ASTM C177 block insulation 板状导热系数

ASTM C335 Apparent thermal conductivity of Pipe insulation 管状导热系数

ASTM C356 Linear shrinkage after heat soaking(649℃) 线性收缩

ASTM C203 method 1(3 point),procedure D Flexural strength(Block insulation only) 弯曲强度 ( 板状 )

ASTM C165 procedure A Compressive resistance(Block insulation only) 抗压强度 ( 板状 )

ASTM C421 Mass loss by tumbling after 10 minutes 10 分钟翻转损失

ASTM C1616 Moisture content 含水率

ASTM C610 Water absorption after heat aging 热老化后吸水率

ASTM E84 Surface burning characteristics 表面燃烧特性

ASTM C411 Hot-surface performance 热面性能 (649℃)

ASTM C795 Stress corrosion cracking of austenitic stainless steel 应力腐蚀性能

ASTM E136 Non-combustible 不燃性